15 Best Free 3D Models for 3D Printing
Have you run out of ideas for what to print next? It happens to the best of us! Beginners and experts alike are always looking for new ways to get the most out of their 3D printers. Don’t let your 3D printer go idle after you’ve run out of projects – there’s always something amazing to print. This article details our favorite free 3D models that almost any printer can handle. No matter your experience level, these solutions are easy to print and modify.
We also chose these models based on their universal appeal. Almost anyone will find these models useful and in some cases, ingenious!
Where Can You Find Free 3D Models?
Our list of the best 3D models was developed from three resources:
These sites offer platforms for designers to showcase their free and paid 3D models. Most systems also allow you to tip designers who you feel deserve recognition. These aren’t the only sites to find free 3D models for 3D printing, though. Also check out sites like:
15 Essential 3D Models Everyone Will Love
Without further ado, here are our top picks for the best 15 3D models that everyone can use. These models were chosen for both their ingenuity and universal appeal, so you’re sure to find something great. When you’re done looking through our list, be sure to check out the sites mentioned above to find more awesome 3D models to print.
iCableGuards
Designer: Sergio Romero (3DNG)
Get it Here: https://pinshape.com/items/17951-3d-printed-icableguards-free-4-eva
Why you need it: Apple products don’t come cheap, which makes it extra frustrating when your charging cable snaps or frays. Use the iCableGuards to give your cables some extra supports at their weakest point. Find a version for USB cables here.
USB, SD and MicroSD Holder
Designer: Lalo_Solo
Get it Here: https://www.thingiverse.com/thing:2637487
Why you need it: Does a mess of storage devices clutter your desk drawer? Are you always losing that one micro SD or USB dongle? Then USB, SD, and MicroSD Holder was made just for you. This quick and easy model allows you to organize all your digital storage devices in one place so you’ll never lose them again.
AAA to AA Battery Converter
Designer: bil.brown1951
Get it Here: https://pinshape.com/items/9392-3d-printed-aaa-battery-to-aa-adapter
Why you need it: It’s happened to us all. You go to replace the batteries in the TV remote, only to discover that you’re out of AAs but rolling in AAA batteries. Just print a few pairs of these AAA to AA Battery Adapters for a quick fix.
Taco Shell Holder
Designer: DanielNoree
Get it Here: https://pinshape.com/items/6992-3d-printed-taco-shell-holder-x3
Why you need it: Finally, one of life’s most pressing concerns has been addressed. Now you can serve tacos upright and ready-to-go in these festive Taco Shell Holders. No intricate parts, no assembly required.
Auto-Plant Waterer
Designer: Kayle-Ann Lee Chee
Get it Here: https://www.myminifactory.com/object/3d-print-diy-auto-plant-waterer-3977
Why you need it: Let’s face it, watering house plants is a chore. Whether you over-water, under-water, or just plain forget, you never have to worry again with this handy gadget. Printed in several parts, this little DIY project is perfect for home horticulturists. Print multiple devices to use all around your home and garden to deliver optimum moisture all day long.
Phone Stand
Designer: GoAftens
Get it Here: https://www.thingiverse.com/thing:2120591
Why you need it: There are a million phone stands out there, but you’ll love this one for its simplicity. A hole in the back allows you to charge your phone on the stand, while the original file can be easily modified to fit any mobile device.
The Big Tooth 2.0
Designer: LloydRogers
Get it Here: https://www.myminifactory.com/object/3d-print-the-big-tooth-2-0-5759
Why you need it: Besides looking awesome, this cool 3D model helps organize your family’s toothbrushes all in one place. There are a lot of ugly, generic toothbrush holders out there, but this isn’t one of them. The Big Tooth 2.0 also makes a great gift.
Bag Holder – Shopping Handle
Designer: ivanseidel
Get it Here: https://www.thingiverse.com/thing:26767
Why you need it: This is one of those rare inventions that’s even better than it looks! Keep this handy device in the trunk of your car to help carry in mountains of groceries with ease. This surprisingly sturdy shopping handle can hold multiple bags at once with no problem. If you want a stronger handle, simply increase the infill percentage.
Center Finder for Edges
Designer: TikiLuke
Get it Here: https://www.thingiverse.com/thing:2199356
Why you need it: This amazing little model makes it foolproof to find the center between any two edges. The file comes with a range of sizes, but you may also alter the model to fit your needs. Every DIY warrior needs a set of these in their toolbox.
Head Massager
Designer: anthony voilque
Get it Here: https://www.myminifactory.com/object/3d-print-head-massage-r-14103
Why you need it: More durable than wire head massagers, this 3D printed model feel just as relaxing. Assembly is easy once all the pieces are printed, and most printers take only a couple hours to complete this model.
Citrus Juicer
Designer: walter
Get it Here: https://www.thingiverse.com/thing:44328
Why you need it: Citrus juicers let you make fresh lemon and lime juice in just a few second, saving you the effort of squeezing by hand. This lovely design works great and, when printed in a bright color, almost impossible to lose. Even if you do accidentally toss this juicer, you can simply print a new one!
Mug Hooks
Designer: workshopbob
Get it Here: https://www.thingiverse.com/thing:2716464
Why you need it: Traditional mug hooks cost anywhere from $10-50 (seriously!), and who remembers to pick them up at the store? Save yourself a lot of time and energy by printing these beautiful mug hooks instead. You just need two screws for installation.
Tie Hanger
Designer: orubap
Get it Here: https://www.thingiverse.com/thing:1027977
Why you need it: Okay, this model may not apply to everyone, but stop to consider the possibilities before you keep scrolling. The Tie Hanger isn’t just for ties. Easily hang belts, purses, scarves, or other accessories with the help of this simple but effective solution.
Circuit Board Bird House
Designer: XYZWorkshop
Get it Here: https://www.myminifactory.com/object/3d-print-circuit-board-bird-house-community-2532
Why you need it: While not a total necessity, this is a fun project that almost anyone can enjoy. Traditional birdhouses come as expensive pre-built monstrosities or need to be built by hand. Skip both these hurtles by printing this simple and appealing birdhouse instead.
Mustache Cookie Cutter
Designer: Mathis
Get it Here: https://www.myminifactory.com/object/3d-print-moustache-cookie-cutter-37352
Why you need it: The Moustache Cookie Cutter may not be your cup of tea, but it’s good to know you can find a huge variety of cookie cutter 3D models online. Why is that important? Not only are store-bought cookie cutters expensive, but they come in very limited designs. Meanwhile, you can find cookie cutter 3D models for every occasion and holiday online.
